electrolux ESL6225 D/W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › electrolux ESL6225 D/W

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • September 12, 2007 at 1:27 pm #30493
    rocker
    Participant

    Built in dishwasher.
    Have no negitive to heater..traced cable back to pressure switch..
    pressure s/w activates when I tested…I have continuity between pressure s/w to top facia on/off switch. cant test for power as I cant get meter probs into connections. am I missing anything and can anyone offer any advice, the next thing is to change the pcb…risky!!
    Cheers John.

    September 12, 2007 at 4:06 pm #227378
    senseib
    Participant

    Re: electrolux ESL6225 D/W

    Is the heater element chamber ok? – They go open circuit, common fault! (Part number: 50280071007)

    Brian.

    September 12, 2007 at 6:12 pm #227379
    rocker
    Participant

    Re: electrolux ESL6225 D/W

    Brian,
    Tested heater circuit ok..have no neg to heater !!

    September 12, 2007 at 6:16 pm #227380
    senseib
    Participant

    Re: electrolux ESL6225 D/W

    Most likely suspect PCB then… 😈

    Brian.

    September 12, 2007 at 6:21 pm #227381
    Penguin45
    Participant

    Re: electrolux ESL6225 D/W

    The “dry-joint-on-pcb” debate will start shortly………..

    Chris.

    September 12, 2007 at 6:34 pm #227382
    rocker
    Participant

    Re: electrolux ESL6225 D/W

    Chris, visual check on pcb, no sign of dry joints ??

    September 12, 2007 at 7:44 pm #227383
    Penguin45
    Participant

    Re: electrolux ESL6225 D/W

    Bumf in your in-box, Rocker.

    Chris.

    September 12, 2007 at 8:04 pm #227384
    rocker
    Participant

    Re: electrolux ESL6225 D/W

    Chris, cheers mate received info.
    John

    September 12, 2007 at 9:01 pm #227385
    admin
    Keymaster

    Re: electrolux ESL6225 D/W

    Sometimes I use one trick: measure where on interesting point (like pressure switch or heater) is coming L (live). After that I switch plug into main plug and see if I have L (live) came on other….if not I go thru this channel to see where is disconnected (interrupted). 😉

    September 12, 2007 at 10:19 pm #227386
    rocker
    Participant

    Re: electrolux ESL6225 D/W

    baron wrote:Sometimes I use one trick: measure where on interesting point (like pressure switch or heater) is coming L (live). After that I switch plug into main plug and see if I have L (live) came on other….if not I go thru this channel to see where is disconnected (interrupted). 😉

    ok, thanks for the advice – I’ve done these tests.

    John.

    September 13, 2007 at 8:20 am #227387
    admin
    Keymaster

    Then you have found which wires from heater are comming to power PCB ( with water inside verify that electronics see heater). If it is OK look on PCB which relay is corresponding to heater and you will find him damaged or his tracks.

    September 13, 2007 at 1:03 pm #227388
    rocker
    Participant

    Re: electrolux ESL6225 D/W

    Baron, thanks for that will check this out.
    John

    September 13, 2007 at 2:01 pm #227389
    Alanj
    Participant

    Re: electrolux ESL6225 D/W

    Hi Rocker,

    are you getting L + N coming into machine? Have had instance where plug or socket were faulty.Try different socket?

    Alanj

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.