Hotpoint Aqualtis AQXXD169 – Filter Problem

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint Aqualtis AQXXD169 – Filter Problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 25, 2007 at 12:17 pm #30813
    narche
    Participant

    Hi Guys, Just a quick question just in case someone has experienced this problem!

    We had an F5 error message appear telling us that the machine is blocked. So we have tried to remove the filter, when we un-screwed it loads of water gushed out all over the floor because you cant actually fit anything underneath it to catch the water! Anyway the problem is we cant get the filter out of the machine to clean it? we have unscrewed it but it wont come out if the machine – any ideas gratefully received.

    Thanks

    September 25, 2007 at 12:30 pm #228565
    kwatt
    Keymaster

    Sounds as if there’s something trapped in there jamming it then and you’ll likely need someone to take it all apart to release it. 😕

    You’ll have to call Hotpoint Service methinks. 🙁

    K.

    September 25, 2007 at 3:19 pm #228566
    narche
    Participant

    kwatt wrote:Sounds as if there’s something trapped in there jamming it then and you’ll likely need someone to take it all apart to release it. 😕

    You’ll have to call Hotpoint Service methinks. 🙁

    K.

    Hmmmm not good then is it, even when hubby pulls it really hard it wont budge!!

    Thanks for your advice.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.