AEG washer dryer E20 fault.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG washer dryer E20 fault.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 1, 2007 at 9:18 pm #30998
    whiskeyjack6058
    Participant

    Went to this today, dont have the model number at hand, but it’s a zanussi type and it’s an update version.
    After tumble drying for about 3 mins, it starts beeping and reporting E20.
    Pump is clear, drainage is fine, T/D element meggas ok, condensor water solenoid is working ok.
    I ran it with the door open and air flow is good.
    Any Ideas guys?
    Many thanks,
    Rob.

    October 1, 2007 at 9:38 pm #229312
    whitevanman
    Participant

    Re: AEG washer dryer E20 fault.

    could be pump, psw or board / conections

    Went to one off these no fault 1st half hour visit went back fully primed, pump seized/sticking changed pump all okay.

    hope this helps
    Wvm

    October 1, 2007 at 10:18 pm #229313
    eastlmark
    Moderator

    Re: AEG washer dryer E20 fault.

    E20 is only the fault that the user see’s. You need to interogate the machine to find the real code ie E21, E23 etc. Usually draining related.

    October 5, 2007 at 10:26 pm #229314
    cab
    Participant

    Re: AEG washer dryer E20 fault.

    yep, condenser is probably blocked

    cab

    October 6, 2007 at 11:12 am #229315
    helo_75
    Participant

    and thats because water doesnt get to the pump, so the toc cuts the pump out cos it gets hot

    usually, thats why its ok on wash, cos its full of water

    best to clean the condenser then change the pump anyway, bet ur life ull be called back!!!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.