Hotpoint mains cable/filter – problems

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint mains cable/filter – problems

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • October 2, 2007 at 3:12 pm #31024
    MickGeorge
    Participant

    Does anyone know if these are giving a problem? Part No C00203264 m/c model WF100

    Went to one a couple of month’s ago tripping ELCB and tested down to earth.. fitted new cable/filter asy.. had to go back today to change part again as same thing..

    Just wondered if anyone else had problems.. are they just cheapo rubbish or might there be something else causing the fillter to break down to earth in such a short time..

    Comments appreciated.. thanks

    Mick

    October 2, 2007 at 3:34 pm #229410
    iadom
    Moderator

    Re: Hotpoint mains cable/filter – problems

    Not had a single one with this problem Mick.

    Jim.

    October 2, 2007 at 5:30 pm #229411
    hotpnt
    Participant

    Re: Hotpoint mains cable/filter – problems

    hi, you’ll prob find the filter is fine, its the plug that shorts out, just cut off & replace

    October 2, 2007 at 6:24 pm #229412
    wilf
    Participant

    Re: Hotpoint mains cable/filter – problems

    I’ve replaced a couple.

    wilf

    October 2, 2007 at 6:37 pm #229413
    iadom
    Moderator

    Re: Hotpoint mains cable/filter – problems

    Good tip about the plug then, thanks hotpnt. 8)


    Jim.

    October 3, 2007 at 7:52 am #229414
    MickGeorge
    Participant

    Re: Hotpoint mains cable/filter – problems

    Yes.. good tip..

    They are not like the usual molded plug lead where you can disconect the lead from the capacitor/filter so next time I get one I try that first..

    Thanks

    Mick

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.