firenzi dw930

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › firenzi dw930

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 19, 2007 at 2:02 pm #31510
    streetlighter
    Participant

    Hi all

    I have a fault with a d/w firenzi dw930 ( looks like a wpl ) its a 4 flashes code but the d/w is empty at start.
    After a reset it pumps for a while and then flashes 4 times, no fiil, didn’t check to see if drain or wash pump as it was a built in jobi.
    cant find a presure pipe under neath is this a lense type d/w as iv’e not come across one of these yet.
    It is empty and says not pumping out, or Have I got the fault code wronge.
    Has anyone come across this problem before as I am stumped.

    Thanks

    Paul

    October 19, 2007 at 5:02 pm #231417
    DentedPorsche
    Participant

    Re: firenzi dw930

    It’s a whirlpool in disguise. Remove the mesh filter and check that the black grid (pressure switch) isn’t gunged up.


    Brian

    October 19, 2007 at 5:12 pm #231418
    streetlighter
    Participant

    Re: firenzi dw930

    Thanks Brian I will try that tommorow.

    Paul

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.