Teknik TKL9060 washer with flooded base

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Teknik TKL9060 washer with flooded base

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 24, 2007 at 7:05 pm #31659
    Simon46
    Participant

    For the database this one activates float switch on empty by filling base with water. Breather hose on drain vessel found dislodged by top concrete weight rubbing against it at top rear right of machine. I expect chafe to follow in time?

    S.

    October 26, 2007 at 8:10 pm #232000
    gegsy
    Participant

    Re: Teknik TKL9060 washer with flooded base

    Cheers for the input Simon 😉

    Greg

    October 26, 2008 at 10:12 am #232001
    Simon46
    Participant

    Re: Teknik TKL9060 washer with flooded base

    Finally the breather hose has chafed through on this Bosch WXLITI01GB/18 and the concrete top weight has hit the inlet valve cracking it. I see there are three holes for the tub springs. Should the drum be moved forward to stop this problem happening again?


    Regards
    S.

    July 5, 2010 at 8:34 am #232002
    Simon46
    Participant

    Re: Teknik TKL9060 washer with flooded base

    Replaced hose again from back of drum to the reservoir that is in line with the drain pump and waste hose on this bosch machine. What would happen if the hose was removed and the holes at back of drum and reservoir were sealed up?

    S.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.