- This topic has 4 replies, 5 voices, and was last updated 18 years, 5 months ago by
.
-
Posts
-
WD 860,Starts to empty ON rinse And tumbles,
But Then Within a short time it starts a slow spin before all the water has gone and floods from draw,
The emptying rate is good, Its just not giving it long enough
Is this a Module fault ❓Re: Hotpoimt WD860. Flood Dispenser
pmb wrote:Is this a Module fault ❓
I wouldn’t think so?….More likely the sump trap is bunged up? 😉
Re: Hotpoimt WD860. Flood Dispenser
Went to an Ariston Washer Drier with EXACT same symptoms yesterday – Checked emptying rate(into a bucket) and it seemed ok and convinced myself it was a board fault. Thought just check to make sure nowt in sump – kids socks in sump and sump filter all gunged up. It was connected to spiggot so maybe that extra little resistance when attached to the spiggot made the difference.
Customer rang up today – over the moon as it’s working a treat and she wants me to drop off more business cards next time I’m passing.
Steve
Re: Hotpoimt WD860. Flood Dispenser
Whenever you get a call to a vougue 2 or 4 Hotpoint with water coming out of the dispenser always check the filter first.
It doesn’t take much rubbish in the filter to cause overfilling faults.
- You must be logged in to reply to this topic.