Hotpoimt WD860. Flood Dispenser

[pmb]

WD 860,Starts to empty ON rinse And tumbles,
But Then Within a short time it starts a slow spin before all the water has gone and floods from draw,
The emptying rate is good, Its just not giving it long enough
Is this a Module fault ❓

[Martin]

Re: Hotpoimt WD860. Flood Dispenser

pmb wrote:Is this a Module fault ❓

I wouldn’t think so?….More likely the sump trap is bunged up? 😉

[RocketMan]

Re: Hotpoimt WD860. Flood Dispenser

Went to an Ariston Washer Drier with EXACT same symptoms yesterday – Checked emptying rate(into a bucket) and it seemed ok and convinced myself it was a board fault. Thought just check to make sure nowt in sump – kids socks in sump and sump filter all gunged up. It was connected to spiggot so maybe that extra little resistance when attached to the spiggot made the difference.

Customer rang up today – over the moon as it’s working a treat and she wants me to drop off more business cards next time I’m passing.

Steve

[cessna]

Re: Hotpoimt WD860. Flood Dispenser

Whenever you get a call to a vougue 2 or 4 Hotpoint with water coming out of the dispenser always check the filter first.
It doesn’t take much rubbish in the filter to cause overfilling faults.

[robbo1973]

Re: Hotpoimt WD860. Flood Dispenser

been to a sovereign washer today with same symptons but all is clear checked sump etc and it does it now and again. any other ideas.

cheers chris

[Author]

Posts