- This topic has 8 replies, 6 voices, and was last updated 18 years, 5 months ago by
.
-
Posts
-
Hi All
had this one today that has a draiing problem, with the water in the drum the pump sounds empty and does not drain at first but after a minute or so it does. Fitted new pump made sure all the hoses were clear a looked for any obstuctions though the sump hose connection and tried again but same as before, removed sump hose again removed float ball but still the same, apart from something floating around in the drum has anybody got any ideas please
John
Re: Hotpoint WMA Washer draining problem
Hi Simon,
It’s to a spigot, havn’t tried it into a bucket
John
Re: Hotpoint WMA Washer draining problem
Was at a H/P WT741 to day, not draining. Through door glass could see the dreaded bath and floor mat, anyway remove machine from under worktop and on further inspection found no blockage whatsoever.
Looking at drain hose where it goes through side hole in unit found hose to be squashed flat due to machine being pushed back against it.
Once repaired pump drained no prob, have had this before but bath mats made me start looking in pump and sump area.
If machine drains into waste pipe via spiggot take this off and check for blockage have found 5p in here before.
silverbroom
Re: Hotpoint WMA Washer draining problem
When I first got to the machine I checked the spigot and found it was almost totally blocked but the pump still didn’t drain imeadiatley after that, there was still a minutes or two when the pump sounded empty then it started to pump the water out.
John
Re: Hotpoint WMA Washer draining problem
Hi
Had this problem once while I worked for Hotpoint, found the corrugated hose to pump from filter needed adjusting (re-aligning) it seemed to be forming an air lock somehow. Hope this helps, long shot but try it.Re: Hotpoint WMA Washer draining problem
Have you removed the pump non return flap, they can cause a problem.
- You must be logged in to reply to this topic.