indesit widl126s 2, 4 and unlock flash

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › indesit widl126s 2, 4 and unlock flash

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 27, 2007 at 4:28 pm #31737
    sherry
    Participant

    Hi can someone help me, I have done a search and tried the filter clean out, ran the cycle again and the same happens, it gets to the second stage which is drain then errors.

    October 27, 2007 at 4:57 pm #232351
    iadom
    Moderator

    Re: indesit widl126s 2, 4 and unlock flash

    If you mean lights 2+4 and door lock light are flashing then it suggests the pressure switch is stuck on full. If the machine is emptying correctly then it could be a faulty pressure switch, partial blockage of the pressure hose, poor connections to the PCB or even a failure of the very ticklish PCB itself.

    Be sure to remove the plug if you intend to take a look.

    Jim.

    October 27, 2007 at 6:53 pm #232352
    sherry
    Participant

    Re: indesit widl126s 2, 4 and unlock flash

    hi, thank you for your reply, the machine is not draining even if you switch off and on then put straight to drain cycle, it does make the noise as though it is draining though. Could it be a blockage in the waste pipe?

    October 27, 2007 at 10:30 pm #232353
    iadom
    Moderator

    Re: indesit widl126s 2, 4 and unlock flash

    There could be a blockage in the internal hoses or the pump body itself, you also need to check the outlet hose for blockages if is connected directly to the sink waste.

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.