hoover tumble dryer hnv375

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hoover tumble dryer hnv375

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • October 27, 2007 at 5:23 pm #31739
    electrofix
    Moderator

    hoover td HNV375

    when this dryer came to me it was dead

    checked pcb and transformer primary was o/c

    replaced board

    now all light come on but if you set programme stop light goes out and filter care light stays on but no heat or motor

    any ideas

    Dave

    checked heater stats and two stats at front all ok heater looks ok but have not done continuity test

    anyone got a wiring diag for this model please ?

    October 27, 2007 at 6:41 pm #232357
    Penguin45
    Participant

    Re: hoover tumble dryer hnv375

    Something in your in-box…….

    Chris.

    November 6, 2007 at 11:47 pm #232358
    electrofix
    Moderator

    Re: hoover tumble dryer hnv375

    thanks chris

    Dave

    December 10, 2007 at 10:59 am #232359
    electrofix
    Moderator

    Re: hoover tumble dryer hnv375

    Hi Chris and all


    still having problems with this dryer

    chris sent me a wiring diag but unfortunatly the diag was for a dryer with an ntc and mine has two standard stats mounted at the front on the filter box if you have vanother diag i would be grateful

    there is a green wire coming off the pcb connector with a .25 insulated spade on the end that is not connected i am reluctant to plug it on in case it blows the new pcb does anyone know if this should be unconnected or not


    anyone with any ideas

    Many thanks

    Dave

    January 2, 2008 at 2:20 pm #232360
    electrofix
    Moderator

    Re: hoover tumble dryer hnv375

    anyone got any ideas on this


    Happy new Year and hopefully prosperous one to all

    January 4, 2008 at 1:26 pm #232361
    jrrepair_2000
    Participant

    Re: hoover tumble dryer hnv375

    Have you got the product code (1st 8 numbers of the serial No.) beginningwith 311

    January 5, 2008 at 12:59 pm #232362
    electrofix
    Moderator

    Re: hoover tumble dryer hnv375

    hi jrrepair numbers are as follows

    HNV275 443 50114

    from rear of machine bar code

    311 0016005493096

    this has been crossed out with red felt pen not sure why but may have been bought as a second

    many thanks

    Dave

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.