Neff S5457X0GB/02

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Neff S5457X0GB/02

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • October 30, 2007 at 8:10 pm #31812
    aahbarnes
    Participant

    Hi again.

    My parents dishwasher this time!

    It a built in Neff, 3 years old. It needs resetting before each wash or it sticks with 1 minute to go and doesn’t finish. Sometimes the dishes are still wet. Started doing this on just the auto program, now does it on all of them.

    Any ideas on this one?

    Thanks
    Andrew

    October 30, 2007 at 9:18 pm #232588
    gegsy
    Participant

    Re: Neff S5457X0GB/02

    Most likely
    1/ Crud in the top of the water matrix (output ventilation valve)
    2/ Transfer pipe crudded up
    3/ Levelling/metering unit crudded up

    4/ Too little water in appliance due to 2 and 3 above

    Power off if you are to investigate yourself

    Greg

    October 30, 2007 at 10:43 pm #232589
    aahbarnes
    Participant

    Re: Neff S5457X0GB/02

    Just wondering where I can find the levelling/metering unit? Is this in the vacinity of the matrix and pressure chamber?

    Many thanks for your help.

    October 30, 2007 at 10:45 pm #232590
    gegsy
    Participant

    Re: Neff S5457X0GB/02

    Yea just below the matrix, it actually plugs into it

    Greg

    October 30, 2007 at 10:57 pm #232591
    clivejameson
    Participant

    Re: Neff S5457X0GB/02

    Greg, isn’t that ‘1 minute left’ actually error code 1 which is no heating?

    …in which case the most likely culprit is the heater itself 😉

    Andrew, the only satisfactory way to confirm is to meter the heater, and if it’s faulty will need replacing…not cheap (circa £80 ) and it’s a big strip-down job to replace 😕

    If you need professional help then try the link below, or if having a go yourself then unplug before doing anything :zap:

    October 30, 2007 at 11:19 pm #232592
    gegsy
    Participant

    Re: Neff S5457X0GB/02

    You may have something Clive 😀 Can’t do any harm in checking just with him saying it was doing it on the auto (turbidity sensor in action) and now it does it on all. My money is on crud 😉 You a betting man Clive 😆

    Greg

    October 30, 2007 at 11:23 pm #232593
    aahbarnes
    Participant

    Re: Neff S5457X0GB/02

    Some good pointers here. If it is reset before each use it works ok, but I can’t see this lasting long.

    October 30, 2007 at 11:37 pm #232594
    clivejameson
    Participant

    Re: Neff S5457X0GB/02

    gegsy wrote: You a betting man Clive 😆

    Greg

    Wish i was…i tipped South Africa for the rugby 😕

    😆

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.