Whirlpool ADP4500

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool ADP4500

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • November 5, 2007 at 6:39 pm #31965
    mjhservices
    Participant

    Whirlpool ADP4500
    Turn on and it pumps out, all okay, then it starts to fill & pumps for about 1 second then stops for 1 second, then fills and pumps for 1 second and so on with the start light flashing all the time this is happening and the machine not going anywhere.
    Any ideas?
    Base not flooded, Tightened plug on flow circuit.
    Regards to all.

    November 5, 2007 at 6:50 pm #233070
    DentedPorsche
    Participant

    Re: Whirlpool ADP4500

    Count the flashes between pauses, the result is in the known error codes.

    Brian

    November 5, 2007 at 7:00 pm #233071
    mjhservices
    Participant

    Re: Whirlpool ADP4500

    The flashes are quick and continuous

    November 5, 2007 at 7:12 pm #233072
    senseib
    Participant

    Re: Whirlpool ADP4500

    NTC failure, pressure switch (often only needs cleaning!) or water in base are common faults on these machines.

    HTH,

    Brian.

    November 6, 2007 at 11:54 am #233073
    DentedPorsche
    Participant

    Re: Whirlpool ADP4500

    Continuous flash is single flash, error code F1. NTC failure.

    Brian

    November 6, 2007 at 4:04 pm #233074
    mjhservices
    Participant

    Re: Whirlpool ADP4500

    Sorry but what does NTC stand for?
    Regards

    November 6, 2007 at 4:22 pm #233075
    senseib
    Participant

    Re: Whirlpool ADP4500

    It’s the finger shaped object located front & centre in the base – half turn screw fit – (the thermistor) part number: 481228268051.

    I would be interested to know if anyone has ever tried fitting the Beko NTC – http://www.4beko.co.uk/cgi-bin/product. … art=ntc{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20 to a whirlpool d/w and if it worked? Much much cheaper!

    Brian.

    November 6, 2007 at 8:11 pm #233076
    Penguin45
    Participant

    Re: Whirlpool ADP4500

    http://www.ukwhitegoods.co.uk/modules.p … t=beko+ntc

    😀

    :p45:

    November 6, 2007 at 9:44 pm #233077
    senseib
    Participant

    Re: Whirlpool ADP4500

    Thanks for that Chris, I will be trying the Beko version out on the very next Whirlpool NTC failure I get. 😉

    Anyone know the part number for Beko NTC?
    Brian.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.