Indesit DI 61 – Controller NO LED’s

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Indesit DI 61 – Controller NO LED’s

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 8, 2007 at 7:24 pm #32060
    parksevets
    Participant

    Hi,
    Hoping for some help on the above.
    Push button broken, stuck down, so replaced.
    No LED’s on display – checked door mechanism and continuity Ok.
    Replaced controller module – worked OK.
    Next time swithed on NO LED’s

    Has anyone any ideas what could be the problem apart from the merloni quality.

    Model: DI 61 UK
    COD: 37184510000
    S/N: 911261608

    Thanks. Steve

    November 8, 2007 at 7:40 pm #233472
    iadom
    Moderator

    Re: Indesit DI 61 – Controller NO LED’s

    Perhaps its because you are trying to wash clothes in a dishwasher. 😉

    Merloni and quality do not belong in the same sentence. 😥

    Jim.

    November 8, 2007 at 8:02 pm #233473
    parksevets
    Participant

    Re: Indesit DI 61 – Controller NO LED’s

    Jim,

    Your’e probably right – must start wearing my specs – eyes now as much use as merloni.

    Cheers Steve. :rolls:

    November 8, 2007 at 8:21 pm #233474
    iadom
    Moderator

    Re: Indesit DI 61 – Controller NO LED’s

    Now I’ve had my little bit of sarcastic fun I have moved your post from the Washers & Dryers forum to the correct forum. 😀

    You need to check if you have a circuit of any kind going into the PCB, mains plug removed and multimeter time, check door switch again first, if they seem OK then you could have another faulty PCB . 😥

    Is there any sign of damage on the PCB that may have been caused by a faulty component such as the heater?

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.