NEFF V4380 WASHER DRYER Motor Stalling

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › NEFF V4380 WASHER DRYER Motor Stalling

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 16, 2007 at 5:33 pm #32255
    admin
    Keymaster

    Stuck with this one……..
    Went to this and customer said not spinning…..did
    usual chexk and no motor action at all……
    replaced end frame with one that can take new brushes
    instead of whole end frame and now motor appears to stall?
    To be honest it took so long to get my next day delivery……5 working days!!!!!!! wont say which supplier!!!!!
    that I had forgot which way windings were ie
    switch 180 degrees over (not end to end) but pretty sure they right.
    Any ideas why motor seems to stall? module? windings?

    Regards Col

    November 17, 2007 at 8:30 am #234256
    admin
    Keymaster

    Re: NEFF V4380 WASHER DRYER Motor Stalling

    Please any Bosch guys got an idea why motor stalls…..
    im sure its not just a problem on this brand of machine…..
    it does starts to turn and you can see the pulley turn about 15 degrees
    for few seconds then it stops and does same other direction
    just as if motor has no go? or is it module?
    Could the windings be the problem if thay are 180 degrees out?


    Regards col

    November 17, 2007 at 8:45 am #234257
    Martin
    Participant

    Re: NEFF V4380 WASHER DRYER Motor Stalling

    It is very possible the motor has stuffed the module in this case? Was the commutator clean and the insulation clear on it I wonder? Getting at the module is a hell of a task on this model, but chances are if you could you may well spot a burnt track there somewhere I suspect? 🙁

    November 17, 2007 at 8:59 am #234258
    admin
    Keymaster

    Re: NEFF V4380 WASHER DRYER Motor Stalling

    Thanks for your reply Martin

    Commutator looked very good clean nothing that would
    stand out. There wasnt much carbon about really
    compared to some ive seen. I didnt take module out
    as it was late on a Friday (typical!) but I will do when I go back.
    Do you think windings being round 180 degrees could be problem….it looks
    as if it will fit either way i just didnt make them as expected
    delivery next day…..by time it came couldnt remember……

    Any other ideas?

    November 17, 2007 at 9:03 am #234259
    admin
    Keymaster

    Re: NEFF V4380 WASHER DRYER Motor Stalling

    Anyone got part number for module I cant make it out on BSH website

    Thanks

    November 17, 2007 at 9:18 am #234260
    bazza500
    Participant

    Re: NEFF V4380 WASHER DRYER Motor Stalling

    295666

    November 17, 2007 at 9:54 am #234261
    admin
    Keymaster

    Re: NEFF V4380 WASHER DRYER Motor Stalling

    thanks module £239 doubt customer will pay that….
    What would you do in this case…..repairing motor
    has revealed an extra fault and so thats my time and
    money on parts which were £45 from connect……
    so too much to absorb…..what would you do?
    I normally dont charge if I dont fix but this has been a bit of
    a bugger so far…..

    Regards Col

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.