creasing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › creasing

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • November 29, 2007 at 5:50 pm #32619
    delta01
    Participant

    hotpoint w/dryer cust complaining of clothes bieng exessivly creased, i have not yet been to it,

    November 29, 2007 at 5:57 pm #235789
    iadom
    Moderator

    Re: creasing

    Model number??

    November 30, 2007 at 9:09 am #235790
    delta01
    Participant

    Re: creasing

    wd61

    November 30, 2007 at 10:42 am #235791
    iadom
    Moderator

    Re: creasing

    Long term users of these machines often complain of creasing but if it has only just started to happen then I would be making sure the timer was switching the heater off for the cool down phase first. The one shot stat would normally trip if there was an overheat condition due to fan failure, or obstructions.

    Jim.

    November 30, 2007 at 2:46 pm #235792
    Martin
    Participant

    Re: creasing

    Another possibility to consider is that if the user overdoses the detergent level, items such as bedsheets for example can stick to the drum. Then for best part of half the drying process the sheets are well creased. 🙁

    Secondly, and the most common reason, is overloading… my money is on the latter. 😉

    November 30, 2007 at 3:46 pm #235793
    wilf
    Participant

    Re: creasing

    hot and cold hoses mixed up?

    wilf

    November 30, 2007 at 3:58 pm #235794
    Martin
    Participant

    Re: creasing

    wilf wrote:hot and cold hoses mixed up?

    If hot water were entering the dryer then the clothes would be more than creased they would be steam-shrunk 😆

    November 30, 2007 at 4:09 pm #235795
    delta01
    Participant

    Re: creasing

    thanks for the input guys, i think the problem occurs after spinning, i asked customer to check if hoses were on right way, and am awaiting their response

    November 30, 2007 at 4:24 pm #235796
    Martin
    Participant

    Re: creasing

    Two phone calls so far and still no job huh?….Get out there boy! Get them tools on the job….earn a couple of bob getting to the bottom of it? Most jobs can be sussed out over the telephone I agree(the Samaritans do it for free 24/7 after all). 😆

    But like Mohammed said to the Mountain….. “stay right where you are and I’ll come to you and see if I can get to the bottom of you’re problem at least?….for a small fee of course”

    :snigger:

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.