Siemens WIQ1633GB/02 FD 8306 Warranty repair

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Siemens WIQ1633GB/02 FD 8306 Warranty repair

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #32692
    Simon46
    Participant

    Is this appliance under a BSH 10 year warranty?

    Regards
    Simon

    #236023
    Martin
    Participant

    Re: Siemans WIQ1633GB/02 FD 8306 Warranty repair

    Ten year warranty?….Never heard of such a thing….can your customer show you the policy document?

    #236024
    don
    Moderator

    Re: Siemans WIQ1633GB/02 FD 8306 Warranty repair

    I got a funny feeling that Siemens did a promo thingy for a limited period a few years ago which was a free ten year warranty. Goatboy would remember if you can find him :rolls:

    Don

    #236025
    Bryan
    Participant

    Re: Siemens WIQ1633GB/02 FD 8306 Warranty repair

    I’m pretty sure all the Siemens WIQ range of machines have a 10 year parts and labour guarantee.

    HTH

    Bryan

    #236026
    Simon46
    Participant

    Re: Siemens WIQ1633GB/02 FD 8306 Warranty repair

    No documentation, customer took over machine with house. I rang BSH they checked 5 year warranty not listed, then 10 year and said it was on the list.
    Customer rang to arrange Callout with BSH they said no warranty, it must be with D&G :rolls: and gave them the number. Lady at D&G obviously did not have any record except extended warranty offer card sent out to that address and not returned.
    Fault is doorseal has rubbed through 3’o clock, interlock wet and i suspect PCB is possibly damaged. Start does not lock door, but if you open door it says close door.

    Regards
    Simon

    #236027
    superfix
    Participant

    Re: Siemens WIQ1633GB/02 FD 8306 Warranty repair

    Customer HAD to register for 10 year warranty.

    By the sounds of it the top power module will need replacing….

    Not cheap.

    #236028
    Martin
    Participant

    Re: Siemens WIQ1633GB/02 FD 8306 Warranty repair

    Simon46 wrote:No documentation, customer took over machine with house.

    Guarantee’s are NOT transferrable to a third party anyway 😉

    #236029
    Simon46
    Participant

    Re: Siemens WIQ1633GB/02 FD 8306 Warranty repair

    Eck the bill for parts only comes to 196 quid delivered 😯 minus trade discount. Do the power module tracks blow or does it fry semiconductors usually?

    S.

    #236030
    superfix
    Participant

    Re: Siemens WIQ1633GB/02 FD 8306 Warranty repair

    Simon46 wrote:Eck the bill for parts only comes to 196 quid delivered 😯 minus trade discount. Do the power module tracks blow or does it fry semiconductors usually?

    S.

    I’ve never noticed any blown tracks before TBH. But there is a triac on the board that controls the door lock/release I believe. You may be able to ID and replace it I suppose

    I don’t get involved with board repairs, so it would be new interlock, door boot and board for me.

    Nice little earner for you if she goes for it though 😉

    #236031
    Simon46
    Participant

    Re: Siemens WIQ1633GB/02 FD 8306 Warranty repair

    Thanks for your help all. Will wait for the phone to ring 😆

    S.

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.