F&P Smart Drive 085 error code 00101011 (43)

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › F&P Smart Drive 085 error code 00101011 (43)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 7, 2007 at 7:07 am #32818
    MattM
    Participant

    I am getting 00101011 (43) error code part way through a cycle. I couldn’t find anything on this code anywhere. Can anyone help.

    I replaced the ‘balance control’ unit as the machine was stop/starting (and the unit was corroded), but has made no difference.

    Thanks

    December 7, 2007 at 9:47 pm #236502
    Penguin45
    Participant

    Re: F&P Smart Drive 085 error code 00101011 (43)

    43 is the out of balance switch fault……

    Given that you have replaced it (and the loom?), it’s unlikely to be the switch itself at fault. You had best check the connection at the PCB end though. Also check that the tub bias spring is in place, otherwise the tub can activate the switch on a nuisance basis. Make sure that the suspension works smoothly and evenly – no snagging or binding.

    Worst case scenario is the PCB itself.

    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.