- This topic has 4 replies, 4 voices, and was last updated 18 years, 4 months ago by
.
Viewing 5 posts - 1 through 5 (of 5 total)
-
Posts
-
switch machine on and door interlock tries to lock itself approx every 3 seconds… I haven’t got a bloody clue !!!! All help greatfully recieved.. Gary…
First check door interlock (change him) but first look on PCB for obvious blow marks and damaged parts (triacs, resistors…)… and enter into service regime…
Have a look for a track blown on PCB ,block with 1 yellow wire 6 red wires, second red wire from right, its going to number 3 on door interlock.
Mark.
Re: ZANUSSI Aquacycle Series FS1255W
had one yesterday same fault, changed board (does not come configured) reprogramed now all okay.
checked original board and there were no blown tracks, all surfmounted comps looked dandy.
Viewing 5 posts - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.