ZANUSSI Aquacycle Series FS1255W

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries ZANUSSI Aquacycle Series FS1255W

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #32826
    legsthediver
    Participant

    switch machine on and door interlock tries to lock itself approx every 3 seconds… I haven’t got a bloody clue !!!! All help greatfully recieved.. Gary…

    #236526
    admin
    Keymaster

    First check door interlock (change him) but first look on PCB for obvious blow marks and damaged parts (triacs, resistors…)… and enter into service regime…

    #236527
    MDE
    Participant

    Have a look for a track blown on PCB ,block with 1 yellow wire 6 red wires, second red wire from right, its going to number 3 on door interlock.

    Mark.

    #236528
    whitevanman
    Participant

    Re: ZANUSSI Aquacycle Series FS1255W

    had one yesterday same fault, changed board (does not come configured) reprogramed now all okay.

    checked original board and there were no blown tracks, all surfmounted comps looked dandy.

    #236529
    admin
    Keymaster

    One of 470Kohms resistors is broken (out)…

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.