Smeg dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg dishwasher

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • December 12, 2007 at 11:58 am #32964
    don
    Moderator

    We have a Smeg DWd1SSE which is showing eroor code E8 during wash cycle and sometimes on power up. Nothing listed in the fault code section which could help.

    Any takers ❓

    D

    December 12, 2007 at 12:29 pm #236942
    eastlmark
    Moderator

    Re: Smeg dishwasher

    Alternating valve I would think.

    December 12, 2007 at 12:46 pm #236943
    don
    Moderator

    Re: Smeg dishwasher

    Thanks Mark I`ll pass the info on.

    Don

    December 13, 2007 at 4:47 pm #236944
    Alanj
    Participant

    Re: Smeg dishwasher

    Hi Don,
    had one of these just yesterday, found the pipe between sump and metering tank on left hand side full of crud.Took off metering tank and flushed out pipe and tank. HTH 😀

    Alan

    December 13, 2007 at 4:57 pm #236945
    don
    Moderator

    Re: Smeg dishwasher

    Thanks Alan, info passed on to engineer. Will post up outcome.

    Don

    December 13, 2007 at 7:09 pm #236946
    eastlmark
    Moderator

    Re: Smeg dishwasher

    Alanj wrote:Hi Don,
    had one of these just yesterday, found the pipe between sump and metering tank on left hand side full of crud.Took off metering tank and flushed out pipe and tank. HTH 😀

    Alan

    Wouldnt be an E8 fault, and old style anyway. They have not used that set up for a good few years now.

    December 14, 2007 at 3:20 pm #236947
    don
    Moderator

    Re: Smeg dishwasher

    eastlmark wrote:Alternating valve I would think.


    All sorted thanks Mark you were spot on.

    Don

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.