Zanussi ZDT6252 dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZDT6252 dishwasher

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 27, 2007 at 6:38 pm #33247
    Albert
    Participant

    Two months ago I replaced the motor on this machine as the fins on the draining impellor had worn away, I used a PMP9004 from connect as a replacement. Now it’s not draining again and I find that the fins on the draining impellor are worn away again. Anyone got any idea why this should happen in such a short time ? Thanks.

    December 28, 2007 at 10:27 am #237984
    DAR01
    Participant

    Re: Zanussi ZDT6252 dishwasher

    You should be able to replace the impellor’s separately they come as a kit obtainable from Connect.
    Sorry don’t have the part no. to hand.

    Some foreign matter in the dishwasher is probably what is causing the fins to fail, make sure there are no bits of glass or bone in the pump housing.

    Mike 😀 😛 😆 😛

    December 28, 2007 at 1:24 pm #237985
    DAR01
    Participant

    Re: Zanussi ZDT6252 dishwasher

    Part No. is DST1522488319 at CONNECT DISTRIBUTION.

    Mike 😛 😆 😛 😆

    December 31, 2007 at 6:43 pm #237986
    Albert
    Participant

    Re: Zanussi ZDT6252 dishwasher

    Thanks Mike,

    I’ll fit the impellor kit and check for foriegn objects then see how it goes.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.