whirlpool top loader inner drum keeps dropping

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool top loader inner drum keeps dropping

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 31, 2007 at 4:28 pm #33318
    bzz67
    Participant

    3rgsc9455jq3. Third time i have seen this one for no spin. Since removing an item from between the drums, i cannot seem to tighten that centre shaft clamp enough to stop the drum sliding down the shaft after a few washes.
    do you know any tricks to stop this from happening or should i replace the clamp.
    never usually have problems fixing these but this one is becoming a pain.

    December 31, 2007 at 7:30 pm #238275
    johnmac11
    Participant

    Re: whirlpool top loader inner drum keeps dropping

    The aluminium housing that the nut goes onto is worn, there should be a lip at the top and it sometimes wears away causing your problem,

    You need part number 481946688948 which is called a “block basket drive”


    John

    January 2, 2008 at 8:59 am #238276
    bzz67
    Participant

    Re: whirlpool top loader inner drum keeps dropping

    great, thanks i will get one ordered.

    January 5, 2008 at 1:07 pm #238277
    bzz67
    Participant

    Re: whirlpool top loader inner drum keeps dropping

    thanks again, job done, easy when you see the new one. can,t believe that much had worn off the old one without trace. still won,t catch me out next time.
    cheers.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.