Samsung B1445VGWX 1400RPM Washing Machine

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Samsung B1445VGWX 1400RPM Washing Machine

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 2, 2008 at 7:44 pm #33351
    motty999
    Participant

    Hi All

    I have the above make of washing machine and currently when it reaches its draining stage it makes a grinding noise and no water drains from the machine at all.

    I have cleaned the debris filter and checked all pipes including the waste pipe and can find no blockages.

    The Drain pump itself has a propeller on it which is very loose, however still attached. It does move from side to side and in and out (if you get what i mean). Could this be the noise or could it be the bearings inside the motor?

    Any advice would be gratefully received as would be where i can purchase new pump if required!

    Cheers
    Motty999

    January 2, 2008 at 9:30 pm #238363
    Penguin45
    Participant

    Re: Samsung B1445VGWX 1400RPM Washing Machine

    If you turn the pump impellor by hand, it should “ping” every quarter of a turn. If it just turns freely with no resistance, the pump motor is goosed.

    Penguin45.

    January 2, 2008 at 9:32 pm #238364
    suedehead1
    Participant

    Re: Samsung B1445VGWX 1400RPM Washing Machine

    hi, the pump impellor shouldnt be very loose it should give a little resistance when it is turned and spring back as the field coil is magnetic, it is a common fault on this type of machine,
    plug out if you go any further.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.