Fisher + Paykel MW053-F won’t start

Hi all,

Recently acquired an old smart drive 053 from a friend going over seas the friend occasionally experienced the problem I am experiencing which is that the washer turns on fine and allows the selection of any options but once the start button is pressed nothing happens the machine just beeps. He said that he would give it a kick or lift it up and down a little and then it would work.

My initial suspicion would be one of the sensors is playing up out of balance or lid closed or similar.

I tried the diagnostic mode as described in the sticky, but it seems the result is different to what I should expect.
Heres what I did:
Turn on by holding down wash temp and power
All the lights on machine turn on and stay that way for a few seconds. Machine does NOT beep twice.
Machine now displays Water Level Low and High lights lit
Push spin speed up button until hold and slow are illuminated.
Wash process shows no lights lit.
If I now press start
Spin light comes on (does that mean fault 128???)

If I now instead press advance the lights are lit as follows:
0100 0100 water level L
If I press start the spin light is also illuminated and the machine beeps.
0100 0101.

Any pointers would be appreciated I am considering shorting the lid closed and balance sensors to see if they are the problem but if someone has more insight that would be appreciated.