Zanussi ZWF or S 1650 go to end within seconds

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWF or S 1650 go to end within seconds

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 17, 2008 at 11:44 pm #33795
    alro
    Participant

    hi gents
    called to a zanussi can select prog start to pump for a couple of second as normal then goes to end of programme drianing for a minute and end of programme this is on all programmes even spin only.done a test; water valves ok, motor ok, when on heating test the regen pump come on but no heat e35 or e33 on error code tested p/s ok, any ideas ive ran out of them
    alro

    January 18, 2008 at 12:44 am #240084
    Penguin45
    Participant

    Re: Zanussi ZWF or S 1650 go to end within seconds

    Have sent you a file with a cake in it.

    Chris.

    January 21, 2008 at 11:07 pm #240085
    alro
    Participant

    Re: Zanussi ZWF or S 1650 go to end within seconds

    Chris
    turned out to be a dry joint on the main pcb
    thanks for the file i have a different email address but do not know how to up date it on this site thanks again as suggested by paul PGS
    cheers alro

    January 21, 2008 at 11:54 pm #240086
    Penguin45
    Participant

    Re: Zanussi ZWF or S 1650 go to end within seconds

    alro wrote:i have a different email address but do not know how to up date it on this site

    Whilst in the Foums, go into Profile – you can update everything from there.

    Chris.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.