Creda T512VW

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Creda T512VW

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 25, 2008 at 9:14 am #34049
    Penguin45
    Participant

    P/no for door seal, please.

    Chris.

    January 25, 2008 at 9:39 am #241030
    bazza500
    Participant

    Re: Creda T512VW

    IIRC Chris, you could only get this seal as part of the front panel. The panel is Obsolete.

    January 25, 2008 at 9:51 am #241031
    iadom
    Moderator

    Re: Creda T512VW

    Seal has always been available, for some daft reason it doesn’t appear in Partfinder but it is in the parts list for Hotpoint varients, although not for that model, try 1700455.

    Jim.

    January 25, 2008 at 9:54 am #241032
    bazza500
    Participant

    Re: Creda T512VW

    I would check as this is a quote from Connects website.

    During april’94 hotpoint changed the way the door seal retains to the front panel. All machines made after this date the seal is permanently fixed to the panelconsequently is it is not possible to replace/refit the seal as a single item. In such cases it will be necessary to replace the panel and air duct assy. Which will be supplied with a seal fitted. Part no. ‘S are listed in appropriate service manuals and the

    January 25, 2008 at 9:58 am #241033
    bazza500
    Participant

    Re: Creda T512VW

    Unless the bit they`ve missed out at the end is “above is a load of b0ll0x”

    :rotl:

    January 25, 2008 at 10:01 am #241034
    iadom
    Moderator

    Re: Creda T512VW

    My own Hotpoint TL61, date code 71 ( November 1999) has that seal and it is still listed in Partfinder. In fact I actually have one of those seals, carry it as a stock item.

    Jim.

    January 25, 2008 at 8:11 pm #241035
    Penguin45
    Participant

    Re: Creda T512VW

    Tell you what, I’ll order one and let you know how I get on.

    Thanks,
    Chris.

    January 25, 2008 at 9:14 pm #241036
    RickT
    Participant

    Re: Creda T512VW

    I’ve found on this model this seal does fit, but has a tendency to pull off when
    large amount are pulled out of the drum. I carefully apply some debor around the front panel lip then fit the seal. Haven’t had one fall of yet!!!

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.