MIELE – g638 filling when on ‘stop’ and draining

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › MIELE – g638 filling when on ‘stop’ and draining

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 25, 2008 at 12:13 pm #34056
    Minge
    Participant

    hi!
    i have a problem with this dishwasher … i suspect a programmer/module fault????

    the dishwasher is filling all the time even when it is in the ‘stop’ position.

    Any ideas anyone????

    ❓

    January 25, 2008 at 12:32 pm #241057
    qas
    Participant

    Re: MIELE – g638 filling when on ‘stop’ and draining

    Had an identical fault here about 6 months ago. Problem was the electronic board failed after the connections to the waterproof system shorted

    You’ll need a new electronic and repair the connections to the waterproof or you’ll be doing it again

    January 25, 2008 at 1:06 pm #241058
    Seamy
    Participant

    Re: MIELE – g638 filling when on ‘stop’ and draining

    If there is supply at valves , change electronic. If there is water coming in while suply is off you possibly need new water-proof valve.
    These have 2 valves in sequence so if on fails second one should stop water, what sometimes happens is that grit gets trapped in valve & doesn’t shut off completetly.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.