INDESIT ISC 70 C

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › INDESIT ISC 70 C

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 25, 2008 at 11:29 pm #34074
    soundcraftman
    Participant

    HI ALL CAN ANYONE HELP ME ON A REALLY CRAP INDESIT CONDENSER DRYER ISC70C. 1ST TRIPPED ALL ELECTRICS + NO HEAT, REMOVED HEATER COVER AT REAR FOUND DROP OF WATER AROUND HEATER. HEATER BLOWN ELEMENTS BENT. CHANGED HEATER WORKED OK FOR A WHILE THEN DID THE SAME TRIPPED ELECTRICS NO HEAT. REMOVED HEATER COVER FOUND WATER AGAIN INSIDE COVER, OBVIOUSLY WATER GETTING INTO ELEMENT AND STATS IN A BIG WAY. ANYONE HAD THIS TROUBLE AND WHAT CAN BE DONE ABOUT WATER COLLECTING IN HEATER COVER. IS IT BLOCKED SOMEWHERE CHEERS ALL AND THANKS.

    January 25, 2008 at 11:53 pm #241122
    helo_75
    Participant

    yep its blocked

    theres a hole between the condenser chamber and the pump housing, and its blocked
    if u put your hand in where the condenser fits, and pull the fluff out, u can then remove the pump housing and poke the hole out (in the bottom left) with something like a cable tie

    please unplug if your gonna try it

    January 27, 2008 at 12:00 am #241123
    soundcraftman
    Participant

    Re: INDESIT ISC 70 C

    Wow thanks helo_75 didnt expect answer so fast cheers
    , Do i have 2 remove either of the side panels to get at pump housing is it an easy fix cheers

    January 27, 2008 at 12:15 am #241124
    Penguin45
    Participant

    Re: INDESIT ISC 70 C

    Condenser housing has the big metal plates in at the front, rear hole has a rubber cap on it down at floor level. If that doesn’t work, then you get into pulling it apart…….

    Penguin45.

    January 27, 2008 at 11:28 am #241125
    helo_75
    Participant

    ur on the wrong machine arent you p45, its a ctd type, theres not bung on the back is there?

    January 27, 2008 at 12:48 pm #241126
    Penguin45
    Participant

    Re: INDESIT ISC 70 C

    Er……… probably demolition time then.

    Penguin45.

    January 27, 2008 at 11:13 pm #241127
    soundcraftman
    Participant

    Re: INDESIT ISC 70 C

    Cheers pipe goes up from pump to resevoir bottle (has overflow down) think the bung type was on hotpoint early type condenser dryers no pump on them with bottle in base

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.