Siemens Extraklasse XL1200

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Siemens Extraklasse XL1200

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • January 29, 2008 at 9:28 pm #34173
    Hennette
    Participant

    My Siemens washing machine is about 4 years old.
    I have had no problems at all until yesterday when the drum stopped working. The cycle commences, water enters the drum and then drains away at the appropriate time however there is absolutely no movement of the drum and no noise to indicate the point where the drum should be turning.
    Is this likely to be an expensive problem?

    January 29, 2008 at 9:31 pm #241531
    Simon46
    Participant

    Re: Siemens Extraklasse XL1200

    Post the E-nr on the door.

    Regards
    S.

    January 29, 2008 at 9:32 pm #241532
    Penguin45
    Participant

    Re: Siemens Extraklasse XL1200

    And have a read of this:
    http://www.ukwhitegoods.co.uk/modules.p … ge&pid=156

    :waving:

    Hi, Si.

    :p45:

    January 29, 2008 at 11:14 pm #241533
    Simon46
    Participant

    Re: Siemens Extraklasse XL1200

    :waving:

    January 30, 2008 at 12:27 am #241534
    gegsy
    Participant

    Re: Siemens Extraklasse XL1200

    Some of the Siemens range have a 5 year guarantee 😉

    Greg

    January 30, 2008 at 9:06 pm #241535
    kelland
    Participant

    Re: Siemens Extraklasse XL1200

    very high chance it will be the brushes, if you are competent in fitting them make sure they slide in the holder okay some need a shaving took off the side with a file…if you dont check this you will have future problems, also fit them with the motor off its quicker in the long run!

    January 30, 2008 at 9:19 pm #241536
    gegsy
    Participant

    Re: Siemens Extraklasse XL1200

    ………and with the appliance unplugged first aswell :plug:
    See if its in 5 year cover first 😉

    Greg

    January 30, 2008 at 9:36 pm #241537
    kelland
    Participant

    Re: Siemens Extraklasse XL1200

    if they dont unplug it they shouldnt even be allowed near the thing!

    January 30, 2008 at 9:40 pm #241538
    gegsy
    Participant

    Re: Siemens Extraklasse XL1200

    Safety first repair second, thats the motto on here 😀

    Greg

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.