- This topic has 2 replies, 2 voices, and was last updated 18 years, 2 months ago by
.
-
Posts
-
Pumps out,then fills and pumps out at the same time,stops and fills and then pumps out again and stops with first three lights flashing. Thought it looks Smeggy ,checked fault codes- apparently it detects a faulty flow meter(which it doesn’t possess??) -but it just needs resetting.Read the reset instructions:’Power off.Switch on and within 3 seconds press start 4 times.Switch off ,wait,switch on and run rinse program.’However there’s only 2 buttons on the top,an on/off switch and a program selector switch. I tried the above reset procedure using the prog selector as start button but no joy.Am I missing something?
Re: Teka ADWG 45 FI d/w
That’s the reset procedure for the 5 button machines, Keef. There are different codes etc for yours. Unfortunately, I can’t share them with you as the disc was in the drive of my lap-top when it went walkies.
Eastlmark should be able to help when he sees this.
Chris.
Re: Teka ADWG 45 FI d/w
Bloody hell! Got another of these babies this time Diplomat ADP 8502 ,Reset it -started ok,filled started wash program,stopped -first three lights flashing plus light no.5.Are these prone to board faults? These machines seem fit for the swap and change brigade i.e. fit new board -oh look it works – crap jobs for proper engineers trying to diagnose faults.
- You must be logged in to reply to this topic.