Tricity Bendix AW1560W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Tricity Bendix AW1560W

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 30, 2008 at 10:53 pm #34206
    bubs
    Participant

    Hi,
    Have a Tricity Bendix AW1560W (914792706/00) auto. Customer reporting 3 beeps / flashes of the end light half way through wash. His manual gives 2 bleeps as a drain fault so can i assume 3 = E3? pressure switch type error?

    Had a quick look today, all looks ok, no blocks, fills to correct levels. If he starts the prog at a rinse or spin there is no error., just from the wash progs.
    Any clues as to likely a p/switch or pcb fault?

    Thanks
    Graeme

    January 30, 2008 at 11:50 pm #241685
    aqualectric
    Participant

    Re: Tricity Bendix AW1560W

    Pressure switch faulty; heater faulty or earth leak @ heater; wiring problem or PCB failure. If it’s only on the wash, I would suggest heater first as the PCB and pressure switch are used at all other times throughout the wash cycle and rinses. 😉

    Hope that helps,

    Steve.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.