zanussi TLE 1116W top loader

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi TLE 1116W top loader

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 31, 2008 at 5:29 pm #34217
    bzz67
    Participant

    i have a problem on a zanussi top loader tle1116w. as the softner is poured into the softner compartment it empties straight away through a small hole at the bottom of the dispenser. i cant open up the dispenser to check inside, i guess the fault can only be in the dispenser but thought i would ask here if anyone else has seen this before as the dispenser is a special order.
    thank you

    January 31, 2008 at 10:18 pm #241709
    aqualectric
    Participant

    Re: zanussi TLE 1116W top loader

    This is a known fault and modified parts are required. Covers have been added at the opening of the overflow; and crosspieces added at the overflow edges.

    Part numbers for modified dispenser units (from TDS):-

    146142012/5 – (3 chamber).

    146142013/3 – (4 chamber).

    146364303/9 – (with the EWM1000 electronic controls).

    from Serial no. 418 – modified parts are already factory fitted.

    Hope that helps,

    Steve.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.