LG WM16220FD Wash M/c No Motor Action?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG WM16220FD Wash M/c No Motor Action?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 5, 2008 at 5:00 pm #34360
    laurenceuk
    Participant

    Hi

    I am going to this machine tomorrow. I don`t see many LG`s so am a little
    ignorant on them.

    It is the type that has the drum pulley as the motor rotor.

    There is no motor action and the display reads `LE` error code.

    Customer says her manual describes it as `motor overload`. The UKW book
    describes it as a `door lock fault`.

    Can any one give any pointers and confirm the `LE` fault code meaning – it
    is only 2 years old.

    Thanks

    Laurence

    February 5, 2008 at 6:35 pm #242295
    lerch
    Participant

    Re: LG WM16220FD Wash M/c No Motor Action?

    Depends if customer means IE or LE !!!!

    LE LOCK ERROR CHECK LEAD 3 PIN TO STATOR – PCB LEAD – REPAIR REPLACE HALL SENSOR IN STATOR FAULTY REPLACE STATOR

    IE WATER INLET ERROR WATER NOT REACHED PRE-SET LEVEL

    February 6, 2008 at 9:51 am #242296
    laurenceuk
    Participant

    Re: LG WM16220FD Wash M/c No Motor Action?

    Thanks Lerch.

    Just to clarify please – is this the correct way to read the LE description.

    Lock error. Check lead – 3 pin to stator (PCB lead). Repair or replace Hall
    sensor in stator. If faulty replace stator.

    Not knowledgeable on these machines – what is a Hall sensor?

    Thanks

    Laurence

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.