Hotpoint BFI620 – Error code

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Hotpoint BFI620 – Error code

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 9, 2008 at 8:21 pm #34463
    qq7
    Participant

    Hi, my Hotpoint BFI620 appears to have stopped working and hasn’t emptied propertly. I have checked the filters and pipes and cannot see any problem. The program indicator has lights 1 & 2 (heavily soiled wash and normal day wash) from left to right flashing together which is not listed in the manual. Can anyone help?

    Regards.

    Chris.

    February 9, 2008 at 11:11 pm #242744
    iadom
    Moderator

    Re: Hotpoint BFI620 – Error code

    I’m afraid its drag it out of its hole time.

    Lights 1+2 signify a drain time out error in most cases, it can be a software recognition error but that is not common.

    The likeliest cause is a pump blockage, the filters on these Indesit machines are not the best and if you don’t rinse your dishes off before you put them in or allow small fragments of glass, bone, wood, chipped crockery etc to get through the filter it will stop the pump.

    Mains plug out. towels all around and tilt it back or onto its left hand side looking from front. Access to the drain pump is from underneath after removing the base plate.

    Click on the link below if you want professional assistance.

    Jim.

    April 19, 2008 at 7:21 pm #242745
    qq7
    Participant

    Re: Hotpoint BFI620 – Error code

    Sorry, never got round to thanking you for the informat. Dragged it out and it was a lemon pip in the pump.

    Regards,

    Chris.

    April 19, 2008 at 7:28 pm #242746
    iadom
    Moderator

    Re: Hotpoint BFI620 – Error code

    A Lemon eh, I’m sooo tempted to state the obvious, :rolls: 😉

    Glad to hear you sorted it and thanks for letting us know the outcome. 8)

    Jim.

    September 23, 2010 at 5:17 pm #242747
    SaltyDog
    Participant

    Re: Hotpoint BFI620 – Error code

    8) Cool site – just educated me a little more !!

    Had the same problem – the above help was right on the button. Identified the drain pump, removed it and the culprit was a small shard of glass. Now up and running.

    Many thanks 😀 😀 😀

    Dog

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.