Hotpoint CTD80 error code 15

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint CTD80 error code 15

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 11, 2008 at 6:31 pm #34519
    SSRAY
    Participant

    The hotpoint website says` Dynamic heater relay with contact welded closed-book a service engineer(not after last time)

    Is this fixable by myself or not? what is it? a relay is a fairly common thing could i just get a new one ?
    ta
    Ray

    February 11, 2008 at 7:38 pm #242981
    helo_75
    Participant

    nope, pcb required… as well as eeprom

    not cheap by any stretch of the imagination

    and there are lots of criteria to be found before u order, such as serial number/drum type etc

    you could start by giving us the serial number, but it might be best taking advantage of the hotpoint 5 year parts guarantee, would probably work out cheaper tbh

    hope that helps

    February 11, 2008 at 7:43 pm #242982
    SSRAY
    Participant

    Re: Hotpoint CTD80 error code 15

    Helped alot thanks, will dig about a bit more.
    Thanks
    Ray

    February 26, 2008 at 12:27 pm #242983
    SSRAY
    Participant

    Re: Hotpoint CTD80 error code 15

    Update-found the recipt last night,its not a year old till 2nd march-rang hotpoint-engineer out tommorow.
    cheers guys
    Ray

    March 5, 2008 at 7:04 pm #242984
    SSRAY
    Participant

    Re: Hotpoint CTD80 error code 15

    😳 well i was at work and the engineer arrived,checked the machine and the condensor needed cleaningout 😳 it appears i cant read instructions 😳 nice guy he was did not charge us the £90 he should have charged-note to self-read the instructions.
    cheers
    Ray

    March 5, 2008 at 7:24 pm #242985
    helo_75
    Participant

    have to say thats a new one on me

    bet he’ll be back

    but fair play to the hotpoint engineer for being fair with you

    good luck

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.