Neff V4380x0GB/13 Fills&Pumps

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff V4380x0GB/13 Fills&Pumps

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 10, 2008 at 6:45 pm #35178
    Turbo
    Participant

    This intergrated washer dryer has had very little use.
    When you select a wash or rinse program it starts filling with water but the pump runs all the time.
    Have 3 clicks on the pressure switch, pressure system clear, I can find no earth faults.
    Wondering if it could be the main power module? could be an expensive mistake though as the board is £224.43 😥
    Any advice would be great.
    Thanks Graham

    March 10, 2008 at 8:50 pm #245426
    AMS
    Participant

    Re: Neff V4380x0GB/13 Fills&Pumps

    Sounds like a sticking pump relay on the power module. I’ve had one of these myself. Usually a sharp bang underneath the machine will stop the pump running, but the next time it’s activated it will probably stick again.

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.