Neff W4380X1GB, goes through program but drum doesn’t move

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Neff W4380X1GB, goes through program but drum doesn’t move

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • March 11, 2008 at 6:49 pm #35210
    cmcmill01
    Participant

    Hi,
    Hope you can give me some advice, my Neff washing machine goes through the selected program, but the drum doesn’t move.
    Water is pumped in, then pumped out. I have cleaned the pump filter.
    The machine doesn’t give me any error messages.
    Any ideas would be great.
    Thanks
    Craig

    March 11, 2008 at 7:40 pm #245525
    superfix
    Participant

    Re: Neff W4380X1GB, goes through program but drum doesn’t mo

    Belt come off perhaps.

    Power off before doing anything :zap:

    March 11, 2008 at 7:59 pm #245526
    cmcmill01
    Participant

    Re: Neff W4380X1GB, goes through program but drum doesn’t mo

    superfix wrote:Belt come off perhaps.

    Power off before doing anything :zap:

    I don’t hear any motor noise, would I if the belt had come off?

    March 11, 2008 at 8:21 pm #245527
    Penguin45
    Participant

    Re: Neff W4380X1GB, goes through program but drum doesn’t mo

    Carbon brush motor – brushes may well be worn out. Good little potboiler here:
    http://www.ukwhitegoods.co.uk/modules.p … ge&pid=156

    Power off if you intend to repair this yourself.

    Penguin45.

    March 11, 2008 at 9:33 pm #245528
    cmcmill01
    Participant

    Re: Neff W4380X1GB, goes through program but drum doesn’t mo

    Penguin45 wrote:Carbon brush motor – brushes may well be worn out. Good little potboiler here:
    http://www.ukwhitegoods.co.uk/modules.p … ge&pid=156

    Power off if you intend to repair this yourself.

    Penguin45.

    Thanks for the quick and useful replies.
    Should I be able to see the brushes from the front or back of the machine.
    Thanks

    March 11, 2008 at 9:39 pm #245529
    Penguin45
    Participant

    Re: Neff W4380X1GB, goes through program but drum doesn’t mo

    Only visible by removing motor…….

    Penguin45.

    March 12, 2008 at 1:16 pm #245530
    cmcmill01
    Participant

    Re: Neff W4380X1GB, goes through program but drum doesn’t mo

    Thanks very much Penguin45.
    Changed the brushes this morning and everything is back to normal.
    Better than the 60 quid call out fine and 40 quid an hour after that.
    Thanks

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.