- This topic has 15 replies, 9 voices, and was last updated 18 years ago by
.
-
Posts
-
hi i have just got a automatic pat tester it also shows readings and i would like to no the min and max reading for pass on earth leak insulation etc thanks alan
Re: pat test help
You really need to get yourself a copy of the IEE Code of Practice, ISBN:0-85296-776-4.
Insulation Resistance:
Class 1 over 3kW___ 0.3 megohm
Other Class 1 ___ 1.0 meg
Class 2 ___ 2.0 meg
Class 3 ___ 250 kilohmEarth Continuity:
Resistance shall not exceed 0.1 ohm + resistance of mains flex earth conductor. Appliances with long flexes like Class 1 vacuum cleaners may show as a fail on the tester but you measure the cable length and calculate its resistance based on estimated CSA. For example 0.75mm cable has a resistance of 0.026 ohm per metre.Re: pat test help
hi lads i no this is prob a stupid question but how can u pat test a cooker when it has no pulg on the end ?
Re: pat test help
Hi
AASWALES that is a silly question, considering that they are letting you loose on electrical appliances. Have you done a PAT testing course? If not then you should NOT be using equipement that you are not competent on.
I.E. PLUGGED APPLIANCE TEST = PAT
Bryan.
Re: pat test help
r600a wrote:
I.E. PLUGGED APPLIANCE TEST = PATBryan.
Plugged now is it, t’was portable when I was a lad 😀
Re: pat test help
Hi
If its got a plug then its classed as portable,If its hard wired then its not portable.Its the easy way to determine if it needs PAT test or not.
Bryan
Re: pat test help
You could temporarily fit a plug on a cooker to do the test but obviously if you did a functional test you would have to make sure you didn’t have several elements on at once and exceed 13 amps.
Re: pat test help
I’ve seen domestic w/m’s hard wired, with a switch above the worktop, (as no dought you all have ) but I still test it for insulation.
All appliances should be tested, with or without a plug.
If without one, then test it from the terminal block.
It covers your own back, if nothing else.
Re: pat test help
if it weighs more than 40kg and can be moved then techniaclly its “transportable” but dont ask me what difference this makes to any test
wilf
Re: pat test help
r600a wrote:Have you done a PAT testing course?
That is the way forward Alan (AASWALES) to be honest. If you seriously wish to include PA Testing as part of your business strategy you need to show you’re qualified for the job. 😉
It’s a one day course, and there are several regular courses all over the UK at a cost to you of around £300 (ish?).
As Phidom say’s you need a copy of the IEE Code of Practice, ISBN:0-85296-776-4. (often included in the price) and away you go…….
Re: pat test help
The course is actually a bit of a joke but I don’t know if anyone would let you take the exam without doing the course. There are a couple of practical bits where you do a formal visual inspection and a PAT test then its a multiple choice exam done at a PC with 30 questions. You are allowed to consult the Code of Practice in the exam 😆
Re: pat test help
Martin wrote:
It’s a one day course, and there are several regular courses all over the UK at a cost to you of around £300 (ish?).
That’s a bit steep. I did mine last year for £125, for another £35 they chucked in the management course as well. (I did both and they forgot to bill me for the management course, but no doubt they’ll get me when I do the 16/17th edition later.)
- You must be logged in to reply to this topic.