Candy D/W CDI1012-80 Fill Problem

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Candy D/W CDI1012-80 Fill Problem

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 20, 2008 at 4:23 pm #35444
    laurenceuk
    Participant

    Hi,

    1st time to one of these dishwashers.

    Fills to operating level ok (I presume) and stops filling then motor comes
    in for fraction of second – stops, machine begins to fill again – stops filling,
    motor comes in for fraction of second – stops, machine begins to fill…..
    and so this cycle continues until the pump comes on and empties some
    water out.

    Then the fill/stop cycle begins again until pump comes in again.

    There are two pressure switches and I assume that the normal level
    pressure switch is switching the water on and off and is faulty.

    The second PS I assume is the level safety switch and is doing its business
    of emptying out the water due to this fault condition.

    Can anyone confirm this please and if I need the `normal fill` pressure
    switch I would appreciate a part number.

    Many thanks.

    Laurence

    March 20, 2008 at 6:13 pm #246515
    Penguin45
    Participant

    Re: Candy D/W CDI1012-80 Fill Problem

    Sounds a pretty reasonable deduction to me….

    Pressure switches (both):
    41009660 up to d/c 0523
    41016499 from d/c 0523

    Chris.

    March 20, 2008 at 6:31 pm #246516
    laurenceuk
    Participant

    Re: Candy D/W CDI1012-80 Fill Problem

    Thanks Peng,

    I was about to ask how I identify the date code but both those numbers go to the same Connect part number – would this be expected or are they wrong.

    Laurence

    March 20, 2008 at 6:42 pm #246517
    Penguin45
    Participant

    Re: Candy D/W CDI1012-80 Fill Problem

    No supercession on Masterpart, so don’t know……. Ask DC?

    Chris.

    March 22, 2008 at 10:13 pm #246518
    Dave_Conway
    Participant

    Re: Candy D/W CDI1012-80 Fill Problem

    Order 41009660, it superseded the earlier one 😉

    Dave.

    March 22, 2008 at 10:25 pm #246519
    laurenceuk
    Participant

    Re: Candy D/W CDI1012-80 Fill Problem

    Thanks Dave

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.