Tecnik 2677 Runs and Runs and Runs……

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Tecnik 2677 Runs and Runs and Runs……

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • March 22, 2008 at 10:16 pm #35479
    Doobrey
    Participant

    Hi guys,
    I have a Tecnik 2677 Dishwasher, which is approximately 4.5 years old. About 6 months ago I had the pump replaced, which seemed to make the machine work wonderfully.

    Anyway, From yesterday, the machine starts it’s cycle and just runs and runs and runs – my girlfriend noticed it was still running after about 5 hours!

    The only thing we can think that we have changed is that i filled up the salt and rinse aid the other day – since then it hasn’t worked properly. If we put it on a rinse cycle, it goes through the 30 mins cycle and stops.

    Any help please!

    Doobs.

    March 23, 2008 at 11:53 am #246727
    Doobrey
    Participant

    Re: Tecnik 2677 Runs and Runs and Runs……

    It also doesn’t seem to be getting hot in there…Is this broken and need a brand shiney new one?

    March 23, 2008 at 11:57 am #246728
    kwatt
    Keymaster

    Hi Doobrey,

    Sounds like either a heater or thermostat problem, both will be located underneath and neither being faulty should scrap the machine. Power off if you go in to have a look.

    K.

    March 23, 2008 at 4:08 pm #246729
    Doobrey
    Participant

    Re: Tecnik 2677 Runs and Runs and Runs……

    Thanks – I’m new to this – how would I determine if either 1 is faulty?

    Doobs.

    March 23, 2008 at 7:27 pm #246730
    kwatt
    Keymaster

    Just meter them and see if they’re okay.

    K.

    March 25, 2008 at 8:40 am #246731
    Doobrey
    Participant

    Re: Tecnik 2677 Runs and Runs and Runs……

    Ok – im an newbie – how do I meter?

    Doobs….

    March 25, 2008 at 9:16 am #246732
    kwatt
    Keymaster

    And at that stage Doobrey I’d suggest you get a professional in. You need to be able to meter the components out to check them for continuity to determine which one/s are faulty.

    K.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.