- This topic has 4 replies, 2 voices, and was last updated 18 years ago by
.
-
Posts
-
Sounds very similar to the problem congoblue was having was having with his Neff but I’m having with a Candy c4400. Seems nice and hot when washing and rinsing but everything seems very wet at end of drying cycle! I wonder if the experts could tell me if there is a pressure chamber to look for (full of gunge?)or is there some other cause? many thanks
😀
Re: Candy c4400 not drying properly
There is a pressure chamber at the front of the machine, underneath, retained by 3 screws. Pull the cover and clean inside thoroughly. Power off first.
Poor drying with heat is often caused by lack of rinse-aid – the stuff in the multifunction tablets rarely does what it says on the tin.
THIS is worth a read.
Penguin45.
Re: Candy c4400 not drying properly
Thanks Penguin45, I’ll have a look. The door works a treat now. We use powder and rinse aid but at the age of the machine I bet it does have some gunge! Is the pressure chamber underneath at the front or behind the small panel below the the door?
Re: Candy c4400 not drying properly
If you tip the machine back to a good angle, you’ll see the black cover neer the front, underneath.
Penguin45.
- You must be logged in to reply to this topic.