Zanussi WJS1265W can’t set program.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi WJS1265W can’t set program.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 27, 2008 at 7:02 pm #35574
    Twoten
    Participant

    Called to the above machine, the display shows 3 horizontal bars and can not be set to wash.

    After cancelling, unplugging and fiddling about a bit I manged to set a program, pressed start and the 3 horizontal bars appeared again.

    Customer says this has been doing this intermittently for a while.

    I removed the PCB and tightened the contacts but this has not helped.

    Any ideas would be appreciated.

    March 27, 2008 at 7:04 pm #247168
    Washman
    Participant

    Re: Zanussi WJS1265W can’t set program.

    Hi

    Check the door lock

    Mike

    March 27, 2008 at 7:58 pm #247169
    Twoten
    Participant

    Re: Zanussi WJS1265W can’t set program.

    Thanks Mike,

    I thought you could still program this even with the door open but not start it?

    I did link out the main contacts to see if it made any difference, all that happened was the door lock light came on!

    I have ordered an interlock for this as I normally carry one for van stock, when I have received it I will call back and give it a try.

    Thanks again,

    Keith.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.