cda cw492

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › cda cw492

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • April 6, 2008 at 3:20 pm #35800
    deej
    Participant

    my dishwasher is flashing twice, is this a code!! can you help, it wont work!!? cda cw 492 🙁

    April 6, 2008 at 3:26 pm #248141
    Penguin45
    Participant

    Re: cda cw492

    Whirlpool-built machine, so two flashes indicates that the flood protection system has been activated. This means that water has leaked into the tray under the machine.

    You need to drain the tray to reset the machine, then have a look for the leak.

    Power off before removing any panel, please.

    Penguin45.

    April 6, 2008 at 4:09 pm #248142
    deej
    Participant

    Re: cda cw492

    Thankyou penguin45… will try that! watch this space

    April 6, 2008 at 4:23 pm #248143
    deej
    Participant

    Re: cda cw492

    ok…..? i’ve found the filter tray and removed that. have 4 small and 4 larger screws, do i remove these or do i have to go underneath? 😯

    April 6, 2008 at 4:27 pm #248144
    Penguin45
    Participant

    Re: cda cw492

    If you undo those screws, the sump will fall off………

    Remove decor door (screws 2+4 on the inner door panel). Remove front lower panel to reveal the tray under the machine. Power off and mop up. Try running the machine and use a torch to keep an eye on what is happening – especially ths little horror.

    Penguin45.

    April 6, 2008 at 4:32 pm #248145
    deej
    Participant

    Re: cda cw492

    This appliance is semi integrated has wooden panel on front. just plinth covering the lower part with two screws in…is this what i remove or still the door panel?

    April 6, 2008 at 4:46 pm #248146
    deej
    Participant

    deej wrote:This appliance is semi integrated has wooden panel on front. just plinth covering the lower part with two screws in…is this what i remove or still the door panel?

    no water in tray. machine is clicking on and off but no dishwashing sounds!

    April 6, 2008 at 4:47 pm #248147
    Penguin45
    Participant

    Re: cda cw492

    You won’t get at the lower cover with the decor door in place – it laps over. Any wooden plinth in front of the machine will have to go – you are trying to get to the lowest point of the machine.

    Penguin45.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.