- This topic has 3 replies, 3 voices, and was last updated 18 years ago by
.
-
Posts
-
Hi everyone. Went to the above machine today where the customer reported a strange fault. Selected cottons programme and countdown timer showed 2:10 or so. Started prog no problem but it got down to about 1:55 having filled ok and washing nicely then all of a sudden the timer returned to 2:10 and the start light flashing. Turned machine off then on again and started again fine. Any ideas???..thanks..Mike.
are you not a member of the trade section?
if you were, we could tell you how to go into diagnostics and find the fault properly that way
if you are, open a thread in there, or apply to join
thank you
Re: zanussifjs1225w returning to start of prog after 15 mins
Moved to Trade section, as AAT is a trade member.
Cheers helo 😉Greg
ok
switch machine off
hold start and skip buttons in, turn machine on…. hold buttons for 8 seconds then let gomachine should go into diagnostics
press the cotton button, and at every press, a different component will be activated/tested
eventually an e number will come up
theres you fault
fault code list in the known fault code section
oh and after the fault code comes the pcb coding.. try not to change that.. to get back to normal turn machine on/off again twice
hope this helps
- You must be logged in to reply to this topic.