hotpoint wd440 – F8

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint wd440 – F8

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 11, 2008 at 5:09 pm #35946
    nelson
    Participant

    Hi all,
    I have to call to this one, customer says it has completed the wash ok but when on dry, the on/off button and high heat drying lights flash, this works out as f 08, heater relay. I have not come across this before. Is the relay on the main module? if so does this mean replace the module or can you replace the relay?

    Thanks for any help. 😕

    April 11, 2008 at 5:28 pm #248815
    Penguin45
    Participant

    Re: hotpoint wd440 – F8

    Can be heater relay….. Can be wiring…….. Almost invariably a board fault………

    Relay is soldered to the PCB anyway.

    Crhis.

    April 11, 2008 at 11:41 pm #248816
    nelson
    Participant

    Re: hotpoint wd440 – F8

    Cheers Chris I’ll check it out.

    April 11, 2008 at 11:44 pm #248817
    hotpnt
    Participant

    Re: hotpoint wd440 – F8

    if you go for a module, make sure you get the correct eeprom too, many different types for washer dryers, depending on hot/cold fill, cold fill ony, plus 3 different types of dryer,

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.