Hotpoint WMA61P drum paddle which one do i need?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMA61P drum paddle which one do i need?

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • April 12, 2008 at 5:57 pm #35969
    boselecta
    Participant

    Got the drum paddle with me it is the one where all the holes are the same. There is a space after the third hole from the front then all the spaces are even.
    I know there are three paddles but dont know which one to order, any ideas?
    serial no: 04863303

    April 12, 2008 at 6:15 pm #248901
    johnnyj
    Participant

    Re: Hotpoint WMA61P drum paddle which one do i need?

    If all the holes are the same, there are 2 types one has 3 pips on the front of the paddle and this one is part n/o 1604464, the other has no pips and is 1603824 hope this helps. jj

    April 12, 2008 at 6:18 pm #248902
    Penguin45
    Participant

    Re: Hotpoint WMA61P drum paddle which one do i need?

    Date code 04 – version 2 – 1603824

    Chris.

    April 12, 2008 at 6:22 pm #248903
    boselecta
    Participant

    Re: Hotpoint WMA61P drum paddle which one do i need?

    will order 1603824 version 2 as no pips
    mercy becoup

    April 13, 2008 at 9:40 pm #248904
    bobokines
    Participant

    Re: Hotpoint WMA61P drum paddle which one do i need?

    on this subject. What’s the difference between version 2 and 3

    Bob

    April 13, 2008 at 10:08 pm #248905
    iadom
    Moderator

    Re: Hotpoint WMA61P drum paddle which one do i need?

    I’ve looked at them closely but the only difference I can see is the three small marks on the front of the mk3 and the replacement mk3’s are white. 😕

    I have also fitted Mk2’s in place of mk3’s and vice versa without any comebacks.

    Jim.

    April 13, 2008 at 10:09 pm #248906
    hotpnt
    Participant

    Re: Hotpoint WMA61P drum paddle which one do i need?

    the sliding ‘lugs’ on the version 2 are square, version 3 are chamfered, you can squeeze a 2 into a 3 though

    April 13, 2008 at 10:10 pm #248907
    iadom
    Moderator

    Re: Hotpoint WMA61P drum paddle which one do i need?

    hotpnt wrote:the sliding ‘lugs’ on the version 2 are square, version 3 are chamfered, you can squeeze a 2 into a 3 though

    I will look a bit closer next time. 😆

    April 15, 2008 at 12:16 pm #248908
    Micky 32
    Participant

    Re: Hotpoint WMA61P drum paddle which one do i need?

    Had a call to replace drum paddles on a WMA the other day. I ask her for the model and serial so i’d know which paddles to bring. She lives 15 miles away. So i get there and the paddles don’t fit and i had the correct numbers etc so i couldn’t understand why they didnt fit ❓

    I then found out the drum was replaced under warranty so the hotpoint engineer fitted the newer type drum that uses version 2 lifters 😕

    Always a good idea to ask if the machine has had a drum job before you go to the house.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.