- This topic has 5 replies, 3 voices, and was last updated 17 years, 12 months ago by
.
-
Posts
-
Hello,
have a Samsung J845 ( i am in Australia) which is identical to a J1253,
could hear a noise during wash, so at end took filter cap off to reveal a 5 cent coin and paper clip, and another larger pin
re-screwed fliter cap and ever since have had a reasonable leak from the filter cap (maybe a half to one litre), have taken filter out and rescrewd but again leaks
does the filter cap “seal” need replacing or is something more serious,
any help appreciated
thankyou
robots
Re: hello Samsung J1253/J845
Is there lugs on the filter which slide in/line up on the pump body vortex chamber?
S.
Re: hello Samsung J1253/J845
hello,
yes, the filter cap has a white plastic attachment which slides into the chamber, there is 2 grooves in the chamber and I have been sliding it into these
the white attachment which is attached to the filter cap also has a rubber seal on it
thankyou
robots
Re: hello Samsung J1253/J845
hello,
during normal operation does the filter chamber fill with water?
thankyou
robots
Re: hello Samsung J1253/J845
It’s the lowest point of the machine……..
Ensure that there are absolutely no deposits lying in the threads where the filter screws in. It will stop it going home and water will dribble out.
Penguin45.
- You must be logged in to reply to this topic.