Zanussi fs1255w Module – UK Whitegoods

This topic has 12 replies, 5 voices, and was last updated 17 years, 11 months ago by allan.

Viewing 13 posts - 1 through 13 (of 13 total)

Author

Posts
April 18, 2008 at 4:40 pm #36127

allan
Participant

Hi can anyone please tell me what the difference is, on connects site there are two different modules listed for the Zanussi fs1255w one is preconfigured and about £40 more? I have ordered the cheaper one and think i may have made a cock up!
Thanks Allan

April 18, 2008 at 5:52 pm #249664

boselecta
Participant

Re: Zanussi fs1255w Module

One is the pre-configured, the other you have to configure yourself using binary coding, can be quite trickey to do. Did a day course on coding these modules from blank at last place of work, I would advise getting the pre-configured board. i have the config codes if you are going to do it yourself.
what is the pnc?, its easier to do on machines that have an led display.

April 18, 2008 at 7:07 pm #249665

allan
Participant

Re: Zanussi fs1255w Module

hi that would help a lot thanks, i have already got new board so will have to try and program it 😥 I think the pcn is 914791166 serial no. 32100949 type p6847646
Thanks again, look for ward to receiving the codes
Allan

April 18, 2008 at 8:43 pm #249666

boselecta
Participant

Re: Zanussi fs1255w Module

will post it tomoro when back in the office

April 18, 2008 at 8:45 pm #249667

allan
Participant

Re: Zanussi fs1255w Module

Cheers mate

April 18, 2008 at 8:56 pm #249668

helo_75
Participant

its written on the pcb

on the white label on the top

good luck

April 19, 2008 at 12:10 pm #249669

boselecta
Participant

Re: Zanussi fs1255w Module

Sorry to get your hopes up havn’t got his config code, too late model. you will need a pre-configured board as these blank ones reply on you having the code. try electrolux tech to get the code.
The code wont be on the top of a blank board.

April 19, 2008 at 12:22 pm #249670

allan
Participant

Re: Zanussi fs1255w Module

Thanks for your help and time
Allan

April 19, 2008 at 12:55 pm #249671

Seamy
Participant

Re: Zanussi fs1255w Module

As Helo stated, code for new board will have to be copied off old one and new board then configured, theres a white sticker on old board with the code written on it.
Its not that easy to do if you haven’t done it before.

April 19, 2008 at 1:02 pm #249672

DentedPorsche
Participant

Re: Zanussi fs1255w Module

Can you program the EWM1000 boards? There are no instructions in the service manual for it (that I can see) and if I remember correctly there isn’t a code sticker on the old module either.

There’s no code on my TDS disc and there’s no code on Pro Corner either.
I’m interested in this one as I’ve always been given pre configured boards.

Brian

April 19, 2008 at 1:04 pm #249673

allan
Participant

Re: Zanussi fs1255w Module

Thanks, how can you enter the code and then configure the board?
Thanks Allan

April 19, 2008 at 1:09 pm #249674

helo_75
Participant

ahhhh, nope,you cant configure ewm1000 pcb’s

u need a configured on for that, im afraid

April 19, 2008 at 1:25 pm #249675

Seamy
Participant

Re: Zanussi fs1255w Module

132120226 or 1324017209 are listed as non configured boards for this machine.
97391479116607 is the configured board.
Electrolux now only supply the configured type, presume other suppliers still have old stocks of non configured boards.

Not sure how to configure this board type but as far as i’m aware all new boards have a serial interface connection point (J7 on this board) & in future Service Force engineers will be able to reconfigure all boards using a laptop and SideKick software.
😳
Author

Posts

Viewing 13 posts - 1 through 13 (of 13 total)

You must be logged in to reply to this topic.