AEG washing machine stops after 20 intermitantly code ‘E84’

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG washing machine stops after 20 intermitantly code ‘E84’

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 21, 2008 at 2:36 pm #36181
    boselecta
    Participant

    AEG LAVAMAT 72630
    I have the fault codes for the EWM1000 range but this AEG shows ‘E84’ in the memory, this is not a code i have seen before.
    I tested the appliance and all was ok, she now has called me back and says it is still stopping mid-cycle.
    anyone know what this code is?

    April 21, 2008 at 2:53 pm #249924
    DentedPorsche
    Participant

    Re: AEG washing machine stops after 20 intermitantly code ‘E

    Hiya,
    Code is in the UKWhitegoods Fault code guide, well worth the money too. 😀
    E84. “Sensing” circuit on circulation pump triac faulty (input signal to processor always 0v or 5v). PCB, Drain, cycle blocked (door open) OFF/Reset.

    HTH
    Brian

    April 24, 2008 at 1:24 pm #249925
    boselecta
    Participant

    Re: AEG washing machine stops after 20 intermitantly code ‘E

    Thanks ‘dentedporshe’ found a blockage in circ pump. Think I will have to buy the UKWhitegoods Fault code guide then.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.